Compress Spring Suitable For Medical Respiratory Equipment

- Oct 26, 2017 -


The compression spring is a helical spring which is subjected to pressure, and the material section of it is more rounded, also useful rectangular and many strands of steel coil, spring is generally equal to the pitch, the shape of the compression spring is: cylindrical, conical, middle convex and concave and a small number of non-circular, compression spring circle and the circle between a certain gap, When subjected to external load, Compression Spring the spring shrinks and deforms, storing the deformation energy.

Application and quality requirements of compression springs

Compression springs supply resistance by using multiple open coils to load pressure (such as gravity under the wheel, or body pressure on the mattress). That is, they push back against external pressure. The compression spring is usually a wire, such as pitch coiling and has a fixed diameter. Compression Spring Can be used for medical breathing equipment, medical mobile equipment, hand tools, home care equipment, shock absorber, engine valve spring, etc.

Compression Springs (Compression Springs) provide resistance to external pressure. The compression spring is usually a wire, such as pitch coiling and has a fixed diameter. Compression springs supply resistance by using multiple open coils to load pressure (such as gravity under the wheel, or body pressure on the mattress). That is, they push back against external pressure.

Compression spring is suitable for medical breathing equipment, Compression Spring medical mobile equipment, hand tools, home care equipment, shock absorber, engine valve spring.

The function of the compression spring is to use its tension to press the clutch disc and clutch plate tightly on the split wheel, Compression Spring so that the engine power is reliably transmitted to the transmission system.

The quality requirements of the compression spring are as follows:

1, the appearance of quality requirements: the quality of spring products should be smooth, no cracks, oxide skin, rust and other defects. Cold coil springs do not allow for individual indentation, pits and scratches with a depth exceeding the half of the material diameter tolerance.

2, Material: Compression spring material is 65Mn steel wire or Ⅰ, Ⅱ Group Carbon spring steel wire.

3, Hardness: Quenching, tempering the cold coil spring, hardness value should be in the 44-52HRC range, in special cases, the hardness of the range can be extended to 55HRC.

4. Processing density.

The shape of the compression spring is: cylindrical, conical, convex and concave, Compression Spring and a small number of non-circular, compression spring between the circle and the circle has a certain gap, when the external load when the spring contraction deformation, storage deformation energy.

Compression Springs (Compression Springs) provide resistance to external pressure. Compression springs are usually wire, such as pitch coiling and have a fixed diameter. Compression Springs supply resistance by using multiple open coils to load pressure (such as gravity under the wheel, or body pressure on the mattress). Yes, They pushed back against external pressure.

Compression spring is suitable for medical breathing equipment, Compression Spring medical mobile equipment, hand tools, home care equipment, shock absorber, engine valve spring.