- Aug 22, 2017 -
Model NO.: xhx-sdp2
Material: Stainless Steel
Extension Spring Classification: Power Spring
Load Type: Extension
Diameter Coil Spring: Small coil spring
Inner Diameter: 18mm
HS Code: 73202090
Extension Spring Material: Stainless steel
Usage: Shopping Mall, Department Store, Supermarket
Compression Spring Shape: Spiral
Production Process: Cold Roll
Material Length: 500mm
Outer Diameter: 26mm
Lead Time: 7 Days
Transport Package: Plastic Bag, Carton
|Material||Thickness||Width||Length||Inner Diameter||Outer Diameter||Loading||Weight|
About Flat Spiral Spring
Made of stainless steel strip, formation of the high-strength steel strip by particular machines.
A spiral power spring will naturally coil, develop elastic force and restore its original positon while being stretched.
The difference between flat spiral springs and conventional springs is that spiral springs are a tightly wound structure, whereas conventional springs is a Linear shape, or a spaced-coil shape.
Compared with conventional wire springs, spiral springs have the following advantages,
Elastic force maintained throughout the whole working trip;
Short Preparing time for Elastic force accumulation, achieve required force within very limit distance;
the original length smaller than wire springs;
Unlimited working trip.
Material: material category, yield strength, surface roughness and other factors can all influence the service lifespan of spiral springs. Adopting SUS301 to make spiral springs can achieve the best effect on performance and lifespan.
Force value: different-specification display shelf pushers require different force value. XHX has specific equipment to test the values. By the end of the lifespan customers require, always be able to play a stable performance within the required range of force value.
Shape: after the springs achieve the required force value, repeat stretching the springs to its configured trip-span to do life test. The inner and outer diameters shall not exceed the springs' original dimension after the repeated stretching reaches the springs' supposed lifespan.
Display Shelf Pusher Spring
Shelf pusher springs are mainly used in shelves and display stand in shopping malls, supermarket. The springs adopted are flat spiral springs.
There are two types of springs, one is constant force springs, the other is variable force springs. Constant force springs provide un-varied power, while Variable force springs provide greater power to more goods and longer stretch, smaller power to fewer goods and shorter stretch.
Display shelves equipped with pushers are distinguished from ordinary shelves as following,
When the first object placed in the very front end of a display shelf is take away by a customer, the spring power will move forward those goods located behind. Consequently, there will be no vacancy after goods taken away. No extra labor is required to put more goods onto shelves until those goods inline are all sold/taken out.
It is the springs that activate the pushers to have moving function. Before goods are loaded into pushers or the pushers are stretched, the springs stop still in the front end.
When goods are put on, springs expand to a straight line and gain retracting function. They will keep the goods close to each other, automatically.
Cigarettes, drinks, playing cards, packets of paper towels, cosmetics, etc., can be put in display shelf pushers. And they can be arranged, massively, according to different categories.
The advantages in the price and quality of our steel strip constant/variable force springs are attributed to our powerful technical team.
Some moulds can be adjusted to make same products in different sizes to reduce customers' cost.
Inner circles is larger than outer ones, which makes a higher Round pressure ratio. Therefore the springs have a service lifespan as twice long as Similar products. Exaggeratedly speaking, a single one of this kind of spring is worth two of ordinary ones.
Material thickness ranges from 0.06 ~ 0.8mm to meet different customers' requirements.
Information on Customization
Because this item is only a Generalized standard product (Xin Hui-hung standard), i.e., we do have the ready-made molds, but it is usually ordered by some customer, we do not have stock.
If in need of this spring, please place an order and we will manufacture and deliver at our fastest speed.
If you want different>Contact us for a quotation, with tooling cost and production lead time.
Xinhuixiong focuses on R & D, design and production of precise springs. Currently custom sizes available are, 0.06 - 0.8mm thickness, 4-50mm width, no-limit length (according to customers' requirements).