DIN 2093 disc spring
1. DIN2093 standard.
2. Material: SAE9260(SAE9254) SiCrV4 SUS.
3. Certificate: ISO9001-2008
SAE9260 SiCrV4 SUS Flat Metal Gasket Disc Springs Plating
Disc Spring Washer, with all of their variations, are among the most widely used tension generating washers. They are used for spanning alignment holes, distributing bearing loads and for generating and sustaining the tension needed to hold assemblies together. When loaded to flat, their yield point may be exceeded. These washers, however, are often used in applications where they function entirely within their elastic range.
By varying thickness and crown height relationships, design engineers meet a wide range of load/deflection requirement with Disc Spring washers.
Disc Springs are conically formed angular Discs, which are loaded in the axial direction. Disc Springs offer a well-developed solution to many engineering problems. Through a unique combination of high force in a small space, Disc Springs can be used as single disc or arranged in stacks. A spring stack can consist of either single spring or parallel spring sets. Disc Springs are available with or without contact flats. Disc Springs and Belleville Washers are manufactured to DIN 2093 AND DIN 6796. We have computerized design programmed to assist our customers for their specified applications. Disc Springs are manufactured from imported 50CRV4 material. Our Disc Springs are AUSTEMPERED. This method of heat treatment is particularly effective for springs, as it gives the maximum toughness and therefore considerable durability.
Advantages of Disc Springs
-No Deformation or Fatigue under normal loads.
-High Energy Storage Capacity.
-Long Service Life.
-Stock keeping is minimized as the individual spring sizes can be combined universally.
-Largely Self-damping, giving good shock absorption and energy dissipation.
-Efficient use of space and high spring force with small deflections.
-Adaptable to stacking in numerous configurations.
-Combination use as a modular spring element.
-Low Maintenance cost
Disc Springs offer a well-developed solution to many engineering problems. Through a unique combination of high force in a small space, Disc Springs can be used as single disc or arranged in stacks.
55CrSi or 60Si2Mn, Carbon, steel, music steel, chromium alloy steel wire, and stainless steel, etc
Polishing, zinc plating, nickel plating, chrome plating
High quality & high service